• Home
  • Products
  • Relay Output Industrial Devices Two-axis Switch ZCT210M-JHY
  • Relay Output Industrial Devices Two-axis Switch ZCT210M-JHY
    ZCT210M-JHY
    Relay Output Industrial Devices Two-axis Switch ZCT210M-JHY
    P/N ZCT210M-JHY
    Axis dual axis
    Accuracy ±0.05°
    Resolution 0.003°
    Power supply 8~36V
    Total range ±15°
    Output Relay
    IP Grade IP65
    GET A PRICE
    Description

    Technical parameter:

     

    Operating parameter

    Parameter

    Test condition

    Min value

    Typical

    Max value

    Unit

    Supply vlotage

     

    8

     

    36

    VDC

    Quiescent current

    Without alarm

     

    20

    30

    mA

    Operating temperature range

     

    40

     

    +85

    Output vlotage①

    I=0.5A

     

    VCC-0.5

    VCC

    V

    Output current

     

     

     

    500

    mA

    Remark 1:output vlotage means vlotage drop between singal line and the GND,when the angle reached or excessed the alarm angle.

     

    Performance specification:

    Parameter

    Test condition

    Min value

    Typical value

    Max value

    Unit

    Measuring range

    Two axes

    -15

     

    +15

    °

    resolution②

    Measuring range≤±15°

     

    0.003

     

    °

    accuracy③

    Measuring range≤±15°

     

    ±0.05

     

    °

    Zero temperature drift

    -40+85

     

    ±0.008

     

    °/℃

     

    ±0.5

    ±0.86

    °

    Response time④

     

     

    0.5

     

    s

    Remark 2: resolution means the least variable quantity of measured quantity among the measuring range.

    Remark 3: accuracy means the difference between displayed value of the sensor and the true value of  the corresponding input .

    Remark 4: response time means the the required time for senser output rising to 85% of the output, which is caused by step change of the measured angle.

    Other parameter:

    Parameter

    Test condition

    Min value

    Typical value

    Max value

    Unit

    size

    Without mounting plate,cable and fastener

     

    120*90*38

     

    mm

    Standard cable length

     

    4.9

    5

    5.1

    m

    Wire connection and using instructions:

    Wire connection definition and sketch diagram:

    colour

      RED

    BLACK

    BLUE

    YELLOW

    GREEN

    BROWN

    WHITE

    GREY

    function

    Positive of power

    GND

    Right rear alarm signal

    Right front alarm signal

    Left front alarm signal

    Left rear alarm signal

    Zero set

    GND

     

     Relay Output Industrial Devices Two-axis Switch ZCT210M-JHY-02

     

    Diagram description:

    1. when the angle which is caused by apparatuses located plane below the calibration plane, is greater than or equal to the set alarm angle(angle value of X and Y axis is respectively 0.5º), the corresponding switches(within the relay) switch on, and the signal line chang into low from high impendance. When the angle of the tilt is less than the set alarm angle, the corresponding switches switch off,and signal line comes back into high impendance state.
    2. Short  the set zero line and GND for 2 seconds, and at this time you can set the angle as related zero angle.(please properly handle the set zero line to avoid short circuit when you do not use the function.)

     

    Installation size: unit:mm

    Relay Output Industrial Devices Two-axis Switch ZCT210M-JHY-03

  • OEM & PRICE

    OEM, Lowest prices in the industry, MOQ as low as 1pcs.

  • TEAM

    Our professional R&D and service engineers can find for you solutions that best suit your application.

  • ON TIME

    Efficient and effective production management, timely follow-up and reassured lead time.

  • QUALITY

    One year warranty, long-time stability and reliability, 100% QC passed before delivery.

  • Top