• Home
  • Products
  • Stable Performance High Precision 2-Axis CAN Output Tilt Sensor
  • Stable Performance High Precision 2-Axis CAN Output Tilt Sensor
    ZCT210M-LCS
    Stable Performance High Precision 2-Axis CAN Output Tilt Sensor
    P/N ZCT210M-LCS
    Axis Dual axis
    Accuracy 0.05°
    Resolution 0.01°
    Power supply DC8~32Vol
    Total range -10°~+10°
    Output CAN
    IP Grade IP67
    GET A PRICE
    Description

     Technical Parameter (unless special mark, the following data are typical value in room environment(25℃).

    Item

    Test condition

    Min.

    Typ.

    Max.

    Unit

    Operating specification

    Supply voltage

    8

    32

    VDC

    Quiescent current

    VCC=24V

    45

    mA

    Operating temperature③

    -40

    +85

    Performance specification

    Total range

    2-axis

    -10

    +10

    °

    resolution①

    0.01

    °

    accuracy

    ±0.05

    °

    Response frequency

    3

    Hz

    Zero temperature drift②

    -40—+85℃

    0.008

    °/℃

    others

    Cable length

    0.95

    1

    1.05

    m

    Dimension

    88*64*40

    mm

    Remark 1: Resolution means the least variation of measured device which can be detected by sensor during the measuring range.

    Remark 2: zero temperature drift means when the output is 0º under the room environment, the offset of the angle when temperature is changed.

    Remark 3: In order to reduce the loss of the internal device,12Vol supply voltage is introduced. It is possible that the sensor is broke and its life is reduced when supply is greater than 30Vol. Please avoid such high supply voltage.

    Installation size and wire connection definition:

    In order to obtain the largest variable range of tilt, when the delivery tools and platform are in a normal position, the module should be installed in horizontal.

    Installation size and wire connection definition-001

    Wire connection definition

    Red ―――― VCC(8-32V)               Black ―――― GND

    Yellow―――― CANH                     Blue ―――― CANL

    Installation attentions:

    Incorrect mounting way will cause large angle error. Please make sure correct mounting way of two surfaces and two lines.

    (1) Two surfaces means mounted surface of inclinometer should completely close to mounted surface of measured object(mounted surface of measured object should be horizontal), included angle is not allowed.Correct mounting way is as diagram B.

    (2) Two lines means axis of inclinometer horizontal to axis of measured surface, no included angle between this two axis.Correcting mounting way is as diagram D.

    Installation attentions-001

     

     

  • OEM & PRICE

    OEM, Lowest prices in the industry, MOQ as low as 1pcs.

  • TEAM

    Our professional R&D and service engineers can find for you solutions that best suit your application.

  • ON TIME

    Efficient and effective production management, timely follow-up and reassured lead time.

  • QUALITY

    One year warranty, long-time stability and reliability, 100% QC passed before delivery.

  • Top