• Home
  • Products
  • Shockproof Dual Axis Tilt Switch with Alarm Function
  • Shockproof Dual Axis Tilt Switch with Alarm Function
    ZCT245-FDA-YL
    Shockproof Dual Axis Tilt Switch with Alarm Function
    P/N ZCT245-FDA-YL
    Axis Dual axis
    Accuracy 0.5°
    Resolution 0.1°
    Power supply DC8~36Vol
    Total range -45°~+45°
    Output Tilt switch
    IP Grade IP65
    GET A PRICE
    Description

    Technical specification ( Unless otherwise specified, the following parameters were measured at room temperature 25°C)

    Parameter

    Condition

    Min.

    Type

    Max.

    Units

    Electrical characteristics

    Supply voltage(1

    8

    36

    VDC

    Quiescent current(2

    Horizontal Vcc=12V

    50

    mA

    Operating temperature

    -40

    +85

    Output voltage(3

    I=500mA

    VCC-0.2

    VCC

    V

    Output current(4

    500

    mA

    Performance Characteristics

    Measuring range

    Dual axis

    -45

    +45

    °

    Resolution

    0.1

    °

    Accuracy

    ±10degree

    ±0.5

    °

    Zero temperature drift

    -20+60℃

    ±1.5

    °

    Response time

    0.5

    s

    Other

    size

    Do not include mounting panel, connector and wire

    80*75*58

    mm

    standard length of wire

    0.4

    0.5

    0.6

    m

    Note 1: Recommend to use DC 12-24V power supply, in order to reduce internal loss. When power supply voltage is larger than 36V, it may lead parts damaged or short lifetime.
    Note 2: Quiescent current means input current of parts when power supply voltage is 12V without alarm signal output.
    Note 3: Output voltage means voltage between corresponding signal line and negative power supply when device doesn’t alarm.
    Note 4: Output current means current which flows signal line when device tilt smaller than alarm angle.

    Connection definition and usage instruction

    1. Connection definition

    Color

    Red

    Yellow

    Black

    Green or Blue

    Function

    Vcc

    Alarm signal

    GND

    Relative zero set

    2. When device tilt angle is smaller than set alarm angle ( default value is 2 degree), green light bright, red light off, inner relay is in close state, signal line output high level. If device tilt angle is larger than set alarm angle or equal to it, red light bright, after 2s delay, green light off, inner relay cut off, signal line output high impedance state. When device from alarm angle return to normal angle, red light off, after 2s delay, green light bright, inner relay return to close state, signal line output high impedance state. If tilt state changed in delay period, corresponding output  signal will not change.

    3. When inner switch close, signal line will have a voltage value output which close to power supply, beacuse of inside overload protection, this output voltage value will a little smaller than power supply voltage.

    4. Set zero: make blue or green line and black line( GND) short circuit, at this time green light will change (from off to on or from on to off), after 2s, green light shining, then disconnect the lines, green light bright, set relative zero successfully.  ( If don’t use this function,please deal with green wire properly, avoid it short circuit with other wires.)

    Installation size 

    Installation size-05

  • OEM & PRICE

    OEM, Lowest prices in the industry, MOQ as low as 1pcs.

  • TEAM

    Our professional R&D and service engineers can find for you solutions that best suit your application.

  • ON TIME

    Efficient and effective production management, timely follow-up and reassured lead time.

  • QUALITY

    One year warranty, long-time stability and reliability, 100% QC passed before delivery.

  • Top